Fortin EVO-ONE, being used for OEM 3x lock functionality.
Service No: 002B05 027724
Flashlink settings look okay from what I understand.
So my current situation is this: Unit installed fine, programming went fine, but now won't start after 3x lock. When I press the lock or unlock on my OEM key, the Evo-one will blue-flash accordingly as I'm assuming it's intended, but after 3x lock, nothing happens at all. Also I seem to get a slow red flashing light from the unit (doesn't seem to come from the 3 leds on the front, seems closer to the yellow loop).
The yellow (automatic) loop IS cut, and again it does respond to the lock/unlock on the OEM remote, it just won't start with 3x lock.